Skip to content

Complimentary insured shipping across India · 15-day returns · Lifetime exchange

Client care

Rings and bangles are made to a size; bracelets, anklets and chains to a length. A few minutes with a strip of paper now saves disappointment later — measure at home with the charts below, and if you are unsure, ask us before you order.

Rings

Ring size chart

We use Indian ring sizes. Each size is about one millimetre more around the inside of the ring. Measure the inner diameter of a ring that fits, or the circumference of your finger, and find the matching row.

Please check your size before ordering — see our returns policy for what applies to sized pieces. How to measure.

Already measured?

Indian ring sizes with inner diameter and inner circumference in millimetres
Indian sizeDiameter (mm)Circumference (mm)
614.645.9
715.047.1
815.348.1
915.649.0
1015.950.0
1116.250.9
1216.551.8
1316.852.8
1417.254.0
1517.555.0
1617.855.9
1718.156.9
1818.457.8
1918.859.1
2019.160.0
2119.460.9
2219.761.9
2320.062.8
2420.363.8
2520.664.7
2621.066.0
2721.366.9
2821.667.9
2922.069.1
3022.370.1

Rings · at home

How to measure a finger

  1. Option 1 · With a ring that fits

    Measure its inner diameter

    1. Choose a ring worn on the same finger, with a round inside.
    2. Lay it on a ruler and measure straight across the inside, edge to edge, at the widest point.
    3. Find that diameter in the chart. Between two sizes, take the larger.
  2. Option 2 · With a strip of paper or string

    Measure around your finger

    1. Wrap a thin strip of paper (or non-stretchy string) around the base of the finger — snug, not tight.
    2. Mark where it meets with a pen, and check it would still slide over your knuckle.
    3. Lay it flat on a ruler: the length to the mark, in millimetres, is your circumference. Find it in the chart.

Good to know

  • Measure at the end of the day

    Fingers are slightly larger when warm and smallest in the cold or first thing in the morning.

  • The knuckle must pass

    If your knuckle is wider than the base of your finger, measure both and go by the larger.

  • Wide bands fit snugly

    For bands wider than about 6 mm, choose half a size to a size larger.

  • The right finger, the right hand

    Your dominant hand is usually a little larger — measure the exact finger the ring is for.

  • Between two sizes?

    Choose the larger one.

Still unsure? Ask us — we will help you chooseBack to top

Bangles & kadas

Bangle sizes

Indian bangle sizes describe the inner diameter: 2.4 means 2 and 4/16 inches. A bangle has to slip over your hand, so measure the hand, not the wrist. Children’s bangles follow the same scale from 1 inch: 1.8 is 1 and 8/16 inches.

Some kadas open on a hinge or screw and are a little more forgiving; others are completely rigid and need a precise fit. Each product page says which.

Women & men

Indian bangle sizes with inner diameter in millimetres and inches
Bangle sizeDiameter (mm)Diameter (in)
2.254.02⅛″
2.457.22¼″
2.660.32⅜″
2.863.52½″
2.1066.72⅝″
2.1269.92¾″

Children

Typical Indian bangle sizes for babies and children by age
AgeBangle size
0–6 months1.2 – 1.4
6–12 months1.4 – 1.6
1–3 years1.6 – 1.8
4–6 years1.10 – 2.0
7–12 years2.2 – 2.4 (adjustable)
A guide only — children grow at their own pace. If they already wear a bangle that fits, measure that instead.
  1. Option 1 · With a bangle that fits

    Measure its inner diameter

    1. Lay the bangle on a ruler.
    2. Measure straight across the inside, edge to edge, at the widest point.
    3. Find that diameter in the chart. Between two sizes, take the larger.
  2. Option 2 · With a strip of paper

    Measure around your hand

    1. Bring your thumb and little finger together, as if slipping on a bangle.
    2. Wrap a strip of paper around the widest part of the hand, across the knuckles, and mark where it meets.
    3. Measure the strip and divide by 3.14 for the diameter. Find it in the chart.

Good to know

  • Measure the hand, not the wrist

    A bangle must pass over the knuckles; a wrist measurement will come out too small.

  • Between two sizes?

    Choose the larger. A bangle that does not pass the hand cannot be worn at all.

  • Openable kadas

    A hinged or screw kada opens around the wrist, so it can sit closer than a closed bangle.

  • For little ones

    Baby bangles are often open or adjustable, so one piece fits a range — see “Free size & adjustable” under Bracelets.

Still unsure? Ask us — we will help you chooseBack to top

Bracelets

Bracelet lengths

Chain, tennis and charm bracelets are sized by length — the bracelet itself, end to end — and chosen from your wrist measurement. Find your wrist in the chart to see the bracelet length to choose. Bangles and kadas that slip over the hand are sized differently: see bangles.

Most women wear 6.5″ to 7″; most men around 7.5″. Wrist over 7.5″? Ask us about the length.

Adults

Adult wrist measurement and the bracelet length to choose
Your wristWrist (cm)Bracelet length
5″ – 5.5″12.7 – 14.0 cm5.5″ · 14.0 cm
5.6″ – 6″14.1 – 15.3 cm6″ · 15.2 cm
6.1″ – 6.5″15.4 – 16.6 cm6.5″ · 16.5 cm
6.6″ – 7″16.7 – 17.9 cm7″ · 17.8 cm
7.1″ – 7.5″18.0 – 19.0 cm7.5″ · 19.1 cm

Kids & baby

Typical bracelet length for babies and children by age
AgeBracelet lengthcm
0–1 year4.5″11.4 cm
1–4 years5″12.7 cm
3–6 years5.5″14.0 cm
6–10 years6″15.3 cm
10 years +6.5″16.6 cm
Ages overlap because children do — the child’s wrist matters more than their age. Between two lengths, choose the longer.
  1. Option 1 · Measure the wrist

    With a tape, string or paper strip

    1. Wrap it around the wrist just below the wrist bone, where a bracelet sits — snug, but loose enough to turn.
    2. Mark where it meets and measure it flat on a ruler.
    3. Find your wrist in the chart. Between two sizes, take the larger.
  2. Option 2 · With a bracelet that fits

    Measure its length

    1. Open the clasp and lay the bracelet flat along a ruler.
    2. Measure from end to end, clasp included.
    3. That is the length to order.

Babies & children

Free size & adjustable pieces

Free size and adjustable pieces are made so that one piece fits a range rather than a single size — for example a baby bracelet with a short extension chain, or an open bangle that can be gently eased wider or closer. The product page states the range it fits; if your little one is near either end of it, measure first or ask us.

A gentle word on safety: little ones explore with their mouths, so please let babies and young children wear their jewellery only while someone is with them, and take it off for sleep and bath time. Check clasps and links now and then.

Good to know

  • The one-finger test

    A well-fitting bracelet moves a little, and one finger slides underneath — yet it will not slip over the hand.

  • Tennis bracelets

    Worn fairly close to the wrist, so the stones stay face up rather than turning underneath.

  • Chain & charm bracelets

    Usually worn with a little more movement; with many charms, the longer of two lengths is kinder.

  • Cuffs

    Open at the back and sized by their inner width — ask us for the measurements of the piece.

  • Between two sizes?

    Choose the larger one.

Still unsure? Ask us — we will help you chooseBack to top

Anklets & payal

Anklet lengths

Anklets and payals are sized by length. Measure your ankle, then add about ½″ for a snug fit or 1″ for a softer drape. Most women’s anklets are 8″ to 11″ long, and 9″ is the most common.

Many payals close with a hook or carry a short extension chain, which gives a little room either way. The product page gives the length.

Women

Ankle measurement and the anklet length for a snug or relaxed fit
Your ankleSnug (+½″)Relaxed (+1″)
7.5″8″ · 20.3 cm8.5″ · 21.6 cm
8″8.5″ · 21.6 cm9″ · 22.9 cm
8.5″9″ · 22.9 cm9.5″ · 24.1 cm
9″9.5″ · 24.1 cm10″ · 25.4 cm
9.5″10″ · 25.4 cm10.5″ · 26.7 cm
10″10.5″ · 26.7 cm11″ · 27.9 cm

Babies & children

Typical anklet length for babies and children
AgeAnklet length
Under 6 months4″ – 4.5″
ToddlersAbout 5″ or a little more
Children’s anklets generally run 4″ to 5.5″. For older children, measure the ankle and add ½″.
  1. At home

    Measure the ankle

    1. Wrap a soft tape (or string) just above the ankle bone — snug, with room for one finger underneath.
    2. With string, mark where it overlaps and measure it flat on a ruler.
    3. Add ½″ for a snug fit or 1″ for a looser one, and find that length in the chart.
  2. Or

    Measure an anklet that fits

    1. Open the clasp or hook and lay the anklet flat along a ruler.
    2. Measure from end to end, clasp included.
    3. That is the length to order.

Good to know

  • Where it sits

    Measure where you want it to rest; if it will sit over the ankle bone, measure over the bone instead.

  • A gift?

    An adjustable anklet or a payal with an extension chain is the safest choice when you cannot measure.

  • Between two lengths?

    Choose the longer — an anklet that is too tight is uncomfortable to walk in.

Still unsure? Ask us — we will help you chooseBack to top

Necklaces & chains

Necklace lengths

Chains are sold by length, end to end. The length decides where the necklace falls — from close at the base of the neck to well past the chest. Common lengths are 14″, 16″, 18″, 20″, 22″, 24″ and 30″.

Adults

Necklace styles, their lengths and where each sits
StyleLengthWhere it sits
Choker14″ – 16″Close around the base of the neck
Princess17″ – 19″ (18″ is the classic)At or just below the collarbone
Matinee20″ – 24″Below the collarbone, onto the chest
Opera28″ – 36″ (often 30″)At the breastbone or lower
Lariat36″ +Past the chest

With a pendant

Suggested chain length by pendant size
Pendant sizeChain length
Under 1″16″ – 18″
1″ – 1.5″18″ – 20″
Over 1.5″20″ – 24″
Heavier pendants need a stronger, slightly longer chain; for pendants over 1″ across, add 1″ to 2″.

Children

Typical necklace length for children by age
AgeNecklace length
3–7 years12″ – 14″
8–12 years14″ – 16″
Teens (13+)16″ – 18″
For babies and young children, necklaces should be worn only while someone is with them.
  1. Option 1 · With string

    Find where you want it to fall

    1. Drape a piece of string around your neck and let it fall to where you want the necklace — or the top of the pendant — to sit.
    2. Pinch it where the ends meet, then lay it flat on a ruler.
    3. That length is the chain to choose.
  2. Option 2 · With a necklace you love

    Measure its length

    1. Open the clasp and lay the necklace flat along a ruler.
    2. Measure from end to end, clasp included.
    3. Order that length, or a step longer for a lower fall.

Good to know

  • Your neck matters

    The same chain sits higher on a fuller neck and lower on a slender one — the string test shows it on you.

  • Pendants hang lower

    A pendant adds its own drop below the chain, so a pendant necklace falls further than the chain alone.

  • Layering

    Choose clearly different lengths — say a princess with a matinee — so each chain sits on its own line.

Still unsure? Ask us — we will help you chooseBack to top

Need help?

Not sure between two sizes or lengths, or ordering a surprise? Send us your measurement and the piece you are looking at — our team will call you back, usually the same day.

Chat with us